Cut resistance is a textile-system property. Fiber selection is only one part of the final performance.

Industry Pain Points
Medical implants and advanced PPE require materials that combine ultra-high strength with biocompatibility, chemical inertness, and comfort. Traditional sutures (e.g., PGA/PLA) degrade too quickly, while aramid-based protective gear is heavy, brittle, and causes skin irritation during prolonged wear. Furthermore, many high-performance fibers cannot withstand repeated sterilization cycles without losing mechanical integrity.

Our LCP Fiber Solution
Our fine-denier and ultra-fine denier LCP filaments (7D–50D) offer an exceptional strength-to-weight ratio, making them ideal for next-generation medical textiles. Fine-denier LCP filament may be evaluated for selected medical-device and textile applications requiring low moisture uptake, dimensional stability and long-term mechanical retention;TLCP yarn can be evaluated in woven, braided or blended protective structures where high tensile performance, abrasion resistance and dimensional stability are required.

Key Performance for Medical&PPE
• Sterilization Resistance: >95% Strength Retention after 50 Autoclave Cycles
• Cut Resistance: EN388 Level 5 / ANSI Cut Level A6 Capability
• Flexural Fatigue: Excellent bend recovery for implantable textiles
• Moisture Regain: < 0.1% (Hydrophobic, inhibits bacterial growth)
• Biocompatibility

Recommended Products
Medical-Grade Ultrafine TLCP Filament (7D/18D/25D/30D) – Available in non-absorbable grades; customizable twist and finish for braiding or knitting.
Cut-Resistant PPE Yarn (100D–400D) – Engineered for seamless knitting into gloves, sleeves, and ballistic vests.
Properly engineered LCP fabrics can be evaluated for protective garments requiring repeatedhigh-temperature sterilization.
Their resistance to moisture, heat, and selected disinfectants may support use in operating rooms, isolation areas, and other controlled medical environments, subject to application-specific validation.
Ultra-fine LCP monofilaments or multifilaments may be developed for non-absorbable sutures requiring long-term mechanical stability and resistance to bodily fluids.
Potential applications include orthopedic procedures and abdominal-wall repair, subject to biocompatibility testing, sterilization validation, and regulatory approval.
LCP fabrics may be considered for isolation curtains and partitions used in infectious-disease treatment areas where repeated disinfection, dimensional stability, and resistance to cracking are required.
|
|