Signal integrity is electrical, but cable geometry is mechanical. Reinforcement yarn can help control strain and dimensional change around sensitive conductors and optical fibers.

Industry Pain Points
Miniaturized, highfrequency 5G components require insulating materials with ultralow signal loss, high heat resistance for reflow soldering, and thin diameter for dense wiring. Traditional materials suffer from high dielectric loss (>0.002 at 10GHz) and signal delay.

Our LCP Fiber Solution
TLCP multifilament yarn can be evaluated as a strength member, binder yarn, braided reinforcement, protective textile layer or composite reinforcement where low creep and low moisture uptake are important.
Electrical properties of the finished cable or laminate must be validated at system level.

Key Performance for 5G
• Dielectric Constant (10GHz): 2.9 ± 0.1
• Dielectric Loss (10GHz): ≤ 0.001
• Tensile Strength: ≥ 2.5N (11D)
• Heat Resistance: 260℃ (no melting/deformation)

Recommended Products
Ultrafine LCP Fiber (11D/18D/25D/30D) –Customizable twist, color, and spool specification.
Ultra-fine LCP filaments can be woven into reinforcement fabrics for automotive ADAS millimeter-wave radar modules, base-station antennas, and other high-frequency circuit substrates. Their low moisture absorption and dimensional stability help maintain consistent signal performance under high-temperature and high-humidity conditions.
The material can reduce reliance on imported high-performance LCP fiber fabrics and has entered volume supply for communications-module manufacturers.
Ultra-fine LCP filaments can be braided or wrapped around high-speed server cables, RF coaxial cables, and airborne communication cables for unmanned aerial vehicles.
The material withstands short-term exposure to soldering and reflow temperatures of up to 260°C, while maintaining dimensional stability and resisting shrinkage during repeated thermal processing.
LCP fiber fabrics can serve as reinforcement structures in high-frequency copper-clad laminates used in AI servers, high-performance computing motherboards, FC-BGA substrates, and satellite electronics.
Their low dielectric loss helps address the signal-loss limitations associated with conventional glass-fiber reinforcement at high frequencies.
LCP fabrics can be used as thermal and electrical insulation spacers in photovoltaic junction boxes, combiner boxes, and inverter assemblies.
Their resistance to heat, moisture, chemicals, and UV exposure helps prevent embrittlement, cracking, and dimensional deformation during long-term outdoor service.
|
|