TLCP / LCP Yarn Manufacturing, Customization & Quality Control

What We Control?

* Denier and filament count

* Twist direction and TPM

* Color

* Spool and winding condition

* Breaking force and elongation

* Appearance and filament condition

Configurable Parameters:

  • Denier tolerance: ±2%

  • Twist: 0–500 TPM (Z or S twist)

  • Color: Natural, yellow, black, blue, orange, Pantone-matched custom

  • Spooling: Standard bobbins, king spools, vacuum-sealed barrier packs

Strength Comparison Chart:

材料性能对比表
Performance PropertyTLCP FiberPara-Aramid
Fiber
UHMWPE
Fiber
SteelAluminum

Tensile strength

(MPa)

2,840–3,210about 3,600

about

2,600–3,600

about

400–2,000

about

100–600

Tensile modulus

(GPa)

64.8–72.4

about

70–112

about

97–133

about 200

about70
Density(g/cm³)1.401.440.977.852.70

Relative Strength

(Relative Rating)

★★★★★★★★★★★★★★★★★
Creep tendencyExtremely lowModerateTallLowLow

Moisture absorption

rate

<0.1%约 3–5%<0.1%——
Heat resistanceExcellentGoodPoorExcellentGood
Note: Star ratings follow the qualitative classification from the original image; "approximately" indicates approximate values from the original image, and "-" denotes missing data.

Vertical Integration:

  • Melt spinning through finished filament under one roof

  • Zero dependency on overseas feedstock


Capacity & Lead Times:

  • 10+ metric tons monthly output

  • Stock specifications: 7–10 days dispatch

  • Custom orders: 15–20 days dispatch

  • Expedited programs available on request


What Can Be Tailored:

Denier: Any value between 7D–3000D, tolerance ±2%

Thermal range: Extended stability versions (−196 °C to +240 °C continuous service)

Color: Pantone-matched with UV-stable pigments

Twist & ply: Precision Z/S twist, multi-ply constructions

Packaging: Custom spool geometries, vacuum-sealed moisture-barrier formats


Capacity & Lead Times:

Step 1: Technical alignment call (drawing review, property targets)

Step 2: Lab-scale sampling (5–10 kg, 7–10 days)

Step 3: Pilot validation (50 kg, 15–20 days)

Step 4: Customer qualification testing

Step 5: Commercial ramp-up


Partnership Terms:

  • NDA standard on all development engagements

  • Shared IP structures available for qualified OEM programs

  • Minimum development batch: 50 kg

  • Technical response within 24 hours



Tested Properties:

材料性能参数表
Test ProjectTest methodTypical value
Tensile strength

ISO 2062;Instron  testing machine

≥2.5 N(11 D)
Decomposition temp

Thermogravimetric analysis(TGA),N2

>340 ℃
Melting point

Differential scanning calorimetry(DSC)

280–315 ℃

Dielectric constant(10 GHz)

Resonant cavity2.8–3.0

Dielectric loss(10 GHz)

Resonant cavity≤0.001

Shrinkage(230 ℃ / 15 min)

Thermal aging≤0.5%
Note: The first original image is written as "Tensile strength", measured in N and translated according to the breaking strength.


Raw Material Incoming → Melt index and thermal stability verified by in-house lab

       ↓

In-Process Monitoring → Real-time diameter and tension control at the spinneret

       ↓

Finished Product Testing → Mechanical, thermal, and dielectric properties validated

       ↓

Batch Certification → Full CoA issued with every shipment

1). Specification Table:
纤维规格参数表

Denier

(D)
Filaments
(F)
Tenacity
(N)
Elongation
(%)
Applications
11D1F / 3F≥2.53.0 ± 0.55G antennas, micro-electronics
18D4F≥4.13.0 ± 0.5High-frequency PCB, flex circuits
25D5F≥5.83.0 ± 0.5High-density connectors>
30D5F / 6F≥6.93.0 ± 0.5Wire harness insulation
50D10F / 15F≥12.53.0 ± 0.5Medical braiding, precision textiles
100D20F≥23.03.0 ± 0.5Industrial filtration
500D100F≥110.03.5 ± 0.5Marine ropes, lifting slings
1000D200F≥220.03.5 ± 1.0Heavy-duty cables
3000D600F≥660.03.5 ± 1.0Structural composites, offshore mooring
Note: D stands for denier; F stands for the number of monofilament strands. The original term "Tenacity (N)" is translated as breaking strength according to its unit.
2). Batch Consistency &QC Testing--

Quality isn't a final checkpoint—it's embedded at every stage. In-process controls catch variation before it becomes a defect. Every lot ships with full traceability and a Certificate of Analysis you can hand straight to your compliance team.

3).Honors & Certificates:


4). Supply Chain Security & Lead Times


5).Engineering Partnership & Customization--


Built-In Quality, Not Inspected In
Engineered to Your Specifications

Documentations Available:

  • Technical Data Sheet

  • Certificate of Analysis

  • Lot identification

  • Inspection records where agreed

  • RoHS / REACH / Halogen test reports where applicable
    Customer-specific labels and documentation











Customer-specific labels and documentation

Development Process:

1. Requirement Review

Application, process, load case and specification targets.

2. Sample Evaluation
Existing grade or development sample.

3. Pilot Validation
Processing and lot-consistency evaluation.

4. Customer Qualification
Testing in the actual rope, cable, fabric or composite.

5. Commercial Supply
Approved specification, inspection criteria and documentation.

Off-the-shelf doesn't always fit. When your application pushes beyond standard specs, our engineering team works inside your development cycle—not alongside it. NDA-protected collaboration, direct access to spinning chemists, and pilot runs that bridge the gap between lab concept and commercial volume.

LCP Yarn,LCP Fiber, LCP Filament

ISO9001 certification

LCP Yarn,LCP Fiber, LCP Filament

SGS-Tested for RoHS

A high-performance yarn is only useful if the approved specification can be reproduced lot after lot.

ABUIABAEGAAgrOXnpgYopuDDvQUwsAk4sAk

Mobile/Whatsapp:+86-18680637580

ABUIABAEGAAgn8P8tAYo0JqBjgMwsAk4wgY

E-mail: tammyyang@tlcpfiber.com

ABUIABAEGAAg8OXnpgYopMuw_QUwsAk4sAk

Address: No. 26 Shangkeng North Road, Changping Town, Dongguan City, Guangdong Province

CONTACT US
ABUIABAEGAAg1vawtQYo8dvnmAQwsAk4sAk

Landline: 0769-81898189