A lifting material should be evaluated beyond MBL. Creep, abrasion, bend fatigue and termination efficiency all influence the finished system. In precision cordage, controlled elongation can matter as much as peak strength.

Industry Pain Points
Heavy-lift slings and high-performance sports equipment face a constant trade-off between strength, weight, and durability. Steel wire ropes are prone to corrosion, kinking, and catastrophic failure without warning, while aramid fibers suffer from poor compressive strength and UV degradation. In sports applications, carbon fiber composites add unnecessary stiffness and are prohibitively expensive for high-volume production. Both sectors demand materials that deliver maximum strength with minimum weight—without compromising safety margins.

Our LCP Fiber Solution
Heavy-denier TLCP yarn can be evaluated in woven slings, braided cords and hybrid load-bearing systems where controlled elongation, low creep and dimensional stability are important. Final WLL, safety factor, splice efficiency, edge resistance and fatigue life must be determined on the finished lifting system. Fine and medium-denier TLCP yarn offers high tensile performance, low moisture uptake and dimensional stability for selected high-performance string and cordage structures. It can be evaluated for fishing-line constructions, racket-string development, sailing cordage and other precision braided applications where controlled elongation and repeatable geometry are important.

Key Performance for Lifting & Sports
• Specific Strength: 2,200 kN·m/kg (vs. 250 kN·m/kg for steel wire)
• Tensile Modulus: Up to 70 GPa (tunable via draw ratio)
• Creep Resistance: <0.1% elongation after 10,000h @ 30% break load
• UV Stability: No strength loss after 2,000h Xenon arc exposure
• Abrasion Resistance: 3× higher cycle life vs. aramid in Taber test

Recommended Products
Lifting-Grade LCP Braid Yarn (1000D–3000D) – Low-friction finish optimized for 12-strand hollow braid and double-braid sling constructions.
Sports-Grade LCP Reinforcement Fiber (200D–1000D) – Pre-spread tow for thermoplastic composite prepregs; heat-stabilized monofilament for racquet strings.
LCP multi-filament yarn can be woven into lightweight lifting slings and rigging products for handling photovoltaic modules, precision metal components, and other damage-sensitive loads. It provides high strength, excellent corrosion and weather resistance, good abrasion resistance, and non-marring contact with finished surfaces. Its durability supports repeated use in demanding environments involving friction against rough edges.
LCP multifilament yarn offers low creep, high modulus and strong dimensional stability for parachute lines and precision load-bearing cordage. Its low moisture uptake helps maintain consistent performance under changing environmental conditions. Final performance should be validated in the finished braided line and parachute system.
LCP multifilament yarn is suitable for high-performance braided fishing lines where low stretch, dimensional stability and moisture resistance are important.
Its low creep helps maintain line length and tension under sustained load, while low moisture uptake supports consistent performance in wet environments. The high modulus of LCP also provides a more direct load response, making it suitable for precision fishing-line constructions.
LCP multifilament yarn is suitable for high-performance racquet strings and precision sports cordage where controlled elongation, tension stability, repeatable response, high modulus and long-term dimensional stability are required.
Typical applications include racquet strings, sailing lines, kite cords and other lightweight load-bearing structures that benefit from controlled elongation and stable geometry.
|
|